Directed Electronics HCCA-D1200 Amplifier Section, HCCA-D2400, HCCA-D5000, Crossover Section

SPECIFICATIONS

Amplifier Section	HCCA-D1200	HCCA-D2400	HCCA-D5000
Power Output 4W	250 x 1	450 x 1	1000 x 1
(Watts)note 1
Power Output 2W	400 x 1	800 x 1	1600 x 1
(Watts)note 2
Power Output 1W	600 x 1	1200 x 1	2500 x 1
(Watts)
Amplifier	> 70% into 1W load	> 70% into 1W load	> 70% into 1W load
Efficiency	at max. power	at max. power	at max. power
Externally	yes	yes	yes
Bridgeable
Remote Bass	yes (HP-RB1	yes (HP-RB1	yes (HP-RB1
Function	supplied)	supplied)	supplied)
Distortion at	< 1.0% THD+N	< 1.0% THD+N	< 1.0% THD+N
Rated Power
Frequency	20Hz to 250Hz	20Hz to 250Hz	20Hz to 250Hz
Response	±2.5dB	±2.5dB	±2.5dB
Linear Bandwidth	10Hz to 500Hz	10Hz to 500Hz	10Hz to 500Hz
	±3dB	±3dB	±3dB
Damping Factor	> 200	> 200	> 200
Input Sensitivity	150mV to 5V rms	150mV to 5V rms	150mV to 5V rms
Supply Voltage	9 to 16V	9 to 16V	9 to 16V
Range
	thermal, DC offset,	thermal, DC offset,	thermal, DC offset,
	reverse polarity,	reverse polarity,	reverse polarity,
Protection	short protection,	short protection,	short protection,
	under-voltage,	under-voltage,	under-voltage,
	over-voltage	over-voltage	over-voltage
	Power 0/1 AWG,	Power 0/1 AWG,	Power 0/1 AWG,
Terminal Wire	Remote 12 AWG,	Remote 12 AWG,	Remote 12 AWG,
Gauge	Ground 0/1AWG,	Ground 0/1AWG,	Ground 0/1AWG,
	Speaker 12 AWG	Speaker 12 AWG	Speaker 12 AWG
Input Impedance	20kW	20kW	20kW
Fuse Type	(2) 30 Amp	(3) 40 Amp	In-line 250 Amp
Dimensions	13"x10.5"x2.3"	13"x10.5"x2.3"	13"x10.5"x2.3"
Weight	8 lbs.	8 lbs.	8 lbs.
	Crossover Section
High Pass	Continuously	Continuously	Continuously
Crossover	variable (20-150Hz)	variable (20-150Hz)	variable (20-150Hz)
Low Pass	Continuously	Continuously	Continuously
Crossover	variable (30-250Hz)	variable (30-250Hz)	variable (30-250Hz)
	Selectable On/Off	Selectable On/Off	Selectable On/Off
Infrasonic Filter	24dB/Octave	24dB/Octave	24dB/Octave
	-6dB at 20Hz	-6dB at 20Hz	-6dB at 20Hz
Intelli-Q	0–10dB boost	0–10dB boost	0–10dB boost

1.Continuous 4W load 20Hz to 200Hz, < 1% THD, with input voltage at 14.4VDC.

2.Continuous 2W load 20Hz to 200Hz, < 1% THD, with input voltage at 14.4VDC.

6 © 2006 Directed Electronics, all rights reserved