1188© 2004 Directed Electronics, Inc.
PPLLAAYYIINNGG DDVVDD//CCDD//MMPP33
1. Press the OOnn//OOffffpower button on the front control panel, or press the
button on the remote control to switch on the unit
2. Press MMooddeebutton on the remote control repeatedly until DVD mode is dis-
played.
3. Insert the disc into the DVD player as shown in the illustration below.
NNOOTTEE::To avoid damaging discs, insert the disc into the slot with the disc parallel to the
slot.
4. The disc will automatically start playing.
--- If the DVD does not come with a Menu/Title, the play will continue.
--- If the DVD comes with Menu/Title, Menu Options will be shown on
the screen, press the LLeefftt/RRiigghhtt/UUpp/DDoowwnn(W/X/S/T) buttons
on the remote control, to select the chapter for playing, press the
EEnntteerr(↵↵) button on the remote to begin play.
--- If the message “NO DISC” is displayed on the screen, check the
format of the disc being used and ensure that the disc is being
loaded with the label facing you (see illustration above).
--- If the message “WRONG REGION” is display on the screen, it means
the player does not support the regional code for that DVD.
5. Press the LLeefftt/RRiigghhtt/UUpp/DDoowwnn(W/X/S/T) button on the remote to
select the chaper to be played.
6. Press the PPLLAAYY/PPAAUUSSEE(CCHHT) button on the front control panel or the
play/pause (X/) button on the remote to begin play (you can also use
the EENNTTEERR(↵↵) button on the remote).
Insert Eject