© 2005 Directed Electronics, Inc. all rights reserved
OOppeerraattiinngg tthhee MMoonniittoorr
OOPPEENN//CCLLOOSSEE TTHHEE DDIISSPPLLAAYY MMOONNIITTOORR
To open the display monitor, push the "OPEN" latch and pull the monitor down to the desired position.
To close the display monitor, push the monitor up until it latches closed with an audible click.
PPoowweerr UUpp//DDoowwnn tthhee DDiissppllaayy MMoonniittoorr
The unit will power up when the display monitor is unlatched and pulled down. (If the unit does
not power up, press the Power button on either the remote or on the left side of the LCD screen.
To turn the power Off to the unit, press the POWER button on the remote or press and hold power
button on left side of screen for 4 seconds. Also the power will shut Off when the display monitor
is placed in the closed and latched position.
If the hand icon displays in the upper left-hand corner of the screen when using the remote, it indi-
cates that the command issued is not allowed during the mode that the monitor display is present-
ly in, or is not available on this system.
FFUUNNCCTTIIOONN MMOODDEE ((MMEENNUU))
Press remote "VIDEO MENU" button or monitor "MENU" button to activate the screen set up
sequence as follows:
RESET: Resets COLOR, BRIGHTNESS, TINT, DIMMER, FORMAT to factory settings.
Once the desired setting is selected with the Sor Tbuttons, press the cursor key to the desired
setting. Once the correct function is selected, press the cursor keys Wor X(for the desired adjust-
ment).

TTFFTT VViiddeeoo MMeennuu

Color 8
Brightness 8
Tint 8
Sharpness 8
Contrast 8
Dimmer OFF
Format FULL
Reset X
16