PLAY/PAUSE (DVD/MP3/CD)
Press the "PLAY/PAUSE" (X/ ) button, during playback. The player will be placed in the pause
mode.
Press the "PLAY/PAUSE" (X/ ) button again, the player will return to normal playback.
STOP (DVD/MP3/CD)
(1) During Audio CD playback, when "STOP" ( | ) button is pressed, the CD playback will stop. |
(2) During DVD playback, when the "STOP" ( | ) button is pressed, press "PLAY/PAUSE (X/ )" but- |
ton to continue. The player records the point where the "STOP" ( ) button is pressed (Resume play- back function). Press the PLAY/PAUSE (X/ ) button again, the play will resume from this point.
If "STOP" ( ) button is pressed. “OP” will apppear and the resume playback function will be cleared.
NOTE: Resume playback function is not available for Audio CDs.
REPEAT MODE
For Audio CD/MP3/DVD
When REPEAT button on the remote is pressed,
REP 1 = The current track will be repeated
REP ALL = All the folders will be repeated
REP OFF = Repeat mode will be switched off
CAMERA ANGLE (DVD)
Some DVD discs may contain scenes, which have more than one viewing angle. For these discs, the same scene can be viewed from a different angle by using the "ANGLE" button.
1.During DVD playback, press the "ANGLE" button on remote. “
x/y” will appear, x represents the current camera angle, and "y" represents the total available camera angle.
2.Press the ANGLE button on remote until the preferred angle is selected. The ANGLE selection will cycle through all available camera angle.
NOTE: This function will only work on discs where different camera angles have been recorded.
18 | © 2005 Directed Electronics, Inc. all rights reserved |
|
