DirecTV pmn CONTROLLING DIRECTV RECEIVER

CONTROLLING DIRECTV RECEIVER

The DIRECTV Universal Remote Control is designed to give

you access to features and functions found on your original

remote control. To use it with your brand of DIRECTV

Receiver, you will need to program the remote control by per-

forming the following steps.

1. Locate the DIRECTV Receiver's brand and model num-

ber (on the back or bottom panel) and write it in the

spaces below.

2. Locate the 5-digit code for your DIRECTV Receiver (see

page 10).

3. Power on the DIRECTV Receiver.

4. Move the slide switch to

DIRECTV

icon.

5. Press and hold in the

MUTE

and

SELECT

keys until the

green light under the

DIRECTV

icon flashes twice and

then release both keys.

6. Using the number keys enter the 5-digit code. If per-

formed correctly the green light under the

DIRECTV

icon

will flash twice.

7. Aim the remote at your DIRECTV Receiver and press

that the power key once. The DIRECTV Receiver should

turn off. If it does not turn off, repeat steps 3 and 4, try-

ing each code for your brand until you find the correct

code.

8. For future reference write down the working code for

your DIRECTV Receiver in the blocks below:

DIRECTV CODE:

DirecTV-M2081A.qxd 12/22/2004 3:45 PM Page 9