10
10
Lay cleaner flat and flip
cleaner to expose nozzle
base. Base should lay flat
andfaceup.Toremovenoz-
zleguard,usePhillipsorFlat
Headscrewdrivertoremove
the five (5) screws. Arrows
show location of screws.
Be surebelt is off motor
shaft.Liftandremovebrush-
roll.Disposeofoldbelt.
3.
Lift nozzle guard off.
2.

TOREMOVEBELT

TOOLREQUIRED:PHILLIPSSCREWDRIVER
WARNING:TOREDUCETHERISKOFINJURYFROMMOVINGPARTS-UNPLUGCLEANER BEFORE
CHANGINGBELTORBRUSHROLL.
BELTORBRUSHREMOVAL&REPLACEMENT
Place new belt in area of
brushroll without bristles.
5.
Slidebeltontomotorshaft.
4.

TOREPLACEBELTORBRUSHROLL

Reattachnozzleguard.
7.
Securebyaligningthethree
(3)tabs in the base slots.
Replaceallfive (5)screws
to secure nozzle guard.
With new belt in place, pull
and slide brushroll into nozzle
makingsurethatthebrushroll
end caps are in the correct
orientation(6ainset).Rotate
brushrollmanuallytomake
sure belt is properly aligned.
6.
6a.

BELT STYLE 4 OR 5

MOTOR-
SHAFT
Unefoislanou-
velle courroie
installée, tirez
et glissez le
rouleau-brosse
dans le suceur
en veillant à ce
quelesextrémi-
tés du rouleau-
brosse soient
orientées cor-
rectement (Schéma 6a). Faites pivoter le
rouleau-brosseàlamainpour vousassurer
quelacourroieestalignéecorrectement.
Posez l’aspirateur à plat
retournez-le pour exposer
la base du suceur. La base
doitêtre à plat et tournée
verslehaut.Pour enleverle
dispositif de protection du
suceur, utilisez un tournevis
àpointecruciformeouàlame
plate pour dévisser les cinq
(5) vis. Les flèches indiquent
l’emplacementdesvis.
S’assurerquelacourroieest
horsde l’arbredu moteur.
Tireretenleverlecylindrede
brosses. Mettre l’ancienne
courroie au rebut.
3.
Soulevez le dispositif de
protection du suceur.
2.
DÉPOSE ET REMPLACEMENT DE LA COURROIE ETDELABROSSE
Placezla nouvelle courroie
dans la partie du rouleau-
brosse n’ayant pas de crins.
5.
Glissez la courroie su r
l’arbredemoteur.
4.

POUR REMPLACER LA COURROIE OU LE

ROULEAU-BROSSE

Remettezen place le dis-
positif de protection du
suceur.
7.
Fixez-leenalignantlestrois
(3)languettessurles enco-
ches.Remettezlescinq(5)
vispourfixerledispositifde
protection du suceur.
6.
6a.

COURROIE STYLE 4 OU 5

ARBRE
MOTEUR
OUTILNÉCESSAIRE:TOURNEVISÀPOINTECRUCIFORME
AVERTISSEMENT : POURÉVITERDEVOUSBLESSERAVECLESPIÈCESENMOUVEMENT,DÉBRANCHEZ
L’APPAREILAVANTDEREMPLACERLACOURROIEOULEROULEAU-BROSSE.
1.
TAB TAB TAB
8.
8.
LANGUETTE
LANGUETTE LANGUETTE

POUR ENLEVER LA COURROIE

1.