press ‘ENT’. You will see “Moving to P: ...” and then “OK!” to confirm the writing
to the hard drive. Pressing ‘ENT’ will return to the Edit Track main menu.
8.Press ‘ESC’ to return to the main menu and use the up arrow to change to “8
Select Source.” Change to the hard drive for the source (see page 9) and
then use the arrows to go to “9. Image”, press ‘ENT’ then use the down arrow
to get to “9-05 Select Image” to select the partition (see page 9) of the hard
drive that the compilation was moved to. Go to “1.Copy” and make the CD
from the hard drive.
11. Setup
This function allows the user to specify specific parameters for copying DVDs.
There are 16 sub items. From the main menu screen pressing “ENT” will show
the sub heading, pressing the up and down arrows allows the user to move
between the settings.
11.01Language: allows the user to set English or Spanish as the display lan-
guage.
11.02Burn Speed: allows the user to change the speed at which the unit burns
a CD/DVD. By pressing the ‘ENT’ button the current setting will be dis-
played, the user can then press the up and down arrows to change to
the desired speed. Pressing the ‘ENT’ button will set the speed. Press
‘ESC’ to go back to the main menu.
11.03Read Speed: allows the user to change the speed at which the unit reads
a master DVD. By pressing the ‘ENT’ button the current setting will be
displayed, the user can then press the up and down arrows to change to
the desired speed. Pressing the ‘ENT’ button will set the speed. Press
‘ESC’ to go back to the main menu.
11.04 Auto Start Driveset to ‘On’ will start a copy function as soon as blank
media is detected in the writer drive. The default setting is ‘Off”.
11.05 Startup Menu allows the user to have the ReflexPro DVD start up to any
of the first seven options in the main menu.The default setting is ‘Copy’.
11.06Auto Verify set to ‘On’ will do a verify after every copy is made. The
default setting is ‘Off’.
11.07Auto Compare set to ‘On’ will do a comparison after every copy is made.
The default setting is ‘Off’.
11.08Auto PreScan set to ‘On’ will do a prescan on every CD/DVD placed
in the reader drive. The default setting is ‘Off’.
11.09Eject Disc allows the user to choose what will happen at the end of
function. The three choices are: Eject Good Only, Eject All Disc, and Do
Not Eject. The eject option is only available on the Copy, Test and Copy,
Verify, and Compare functions. The default setting is “Eject Good Only”.
11.10Burn on the Fly allows the user to burn an image of the master to the
hard drive then to blank media. The difference between this and loading
an image is that with “Burn On The Fly” set to ‘off’ the image will be
immediately erased after the write to the blank media. Set to ‘On’ the
ReflexPro DVD will write directly from disc to disc without sending an
image to the hard drive first. With “Burn On The Fly” set to ‘off’ Safe will
appear in the upper right of the LCD display. The default setting is ‘On’.
11.11Burn Mode allows the user to choose Disc at Once or Track at Once for
the burn function. The default setting is ‘DAO’ Disc at Once.
11.12Button Sound set to ‘On’ will cause any pressing of the control buttons to
make a sound. The default setting is ‘On”.
11.13 Device Infohas information on the writer and reader drives.
11.14 System Infohas information on the controller of the ReflexPro.
11.15 Quick Eraseerases the TOC of CD/DVD-RW discs.
11.16 Full Eraseerases all the data on a CD/DVD-RW disc.
1-800-237-6666 www.discmakers.com T
12