121716 11
4. Pressthe 0numbe r button.
5. Pressthe POUND (#) button.
TheTV mod e button flashes three ti mes.
6. Pressthe SAT mode button.
7. Pressthe plus (+) and minus (-) sides of theVOLUME
button.
The TV’s volume changes an d the TV mode buttonlights
insteadof the AUX mode button.
REMOTE CONTROL BUTTONS
CONTROL THE RECEIVER
SATMODE BU TTON
Pressthis button to set the remote to SAT (“satell ite”) mode to control
thereceiver. The SAT mode button’sback light stays litfor about two
secondsto show you’ve set the remoteto SAT mode. Make sure you
keepthe remote in SAT mode to use thebuttons described here.
TV/VIDEOBUTTON
Ifyou connect the receiverwith its back panel TV ANTENNA/CABLE
IN and TV SET OUT ports, use this buttonto switch the receiver
betweenthe satellitesignal (connect it to the SATELLITE IN port) and
anothervideo signal like a cableor broadcast TV antenna input
(connectit to the receiver’s TV ANTENNA/CABLE IN input).
Note: If you connect thereceiver to other devices with the phono
(RCA)jacks or the S-VIDEO output, you must use the TV
menusto change the input from localbroadcast TV to satellite
TV.
text_dishpvr.fm Page 11 Friday, February 28, 2003 1:22 PM