Dish Network 6.2, DVR 942 Dish PLAYER-DVR 522 and 625 only, Setting UP a TV1 UHF PRO Remote for

SETTING UP A TV1 UHF PRO REMOTE FOR THE

DISH PLAYER-DVR 522 AND 625 ONLY

Use these special instructions only if you are going to use the green 1 UHF Pro key to control the TV1 side of your DISH Player-DVR 522 or 625.

When you are finished setting up the remote control, you’ll be able to operate the TV1 side of your DISH Player-DVR 522 or 625 from long distances.

1. Make sure the key is installed as described on pages C-1 and C-2.

2.Make sure the UHF Antenna is attached to the back

of the receiver.

3.Using the receiver’s front panel buttons, press MENU. Select the following onscreen items in this sequence:

a.System Setup.

b.Installation.

c.TV1 UHF Pro Setup.

4.Select Enable from the TV1 UHF Pro Setup screen.

5.Select System Info to open the System Information screen.

10