CARE AND MAINTENANCE

MOWER DECK LEVELING PROCEDURE:

1.Place mower on a smooth, level surface and check tire pressures to insure correct stance. Tires should be inflated as follows.

Front: 16 - 21 lbs

Rear: 8 - 14 lbs

2.Turn each outer blade tip to align with the deck in a side to side manner.

3.Measure from the floor surface up to the bottom of the blade tip on the discharge side of the mower. Retain this measurement. Move to the opposite side and check to see if that measurement is the same. If adjustment is required, turn nut on one or both of the front L-rods until both measurements are equal.

4.Turn each outer blade tip to align with the deck in a front to rear manner.

5.Measure from the floor surface up to the bottom of the blade tips at both the front and rear of the blades. Rear of blade tips should be 1/8" to 1/4" higher than the front of blade tips. If adjustment is necessary, loosen jam nuts on tie bar. Rotate bar to achieve desired height. Retighten jam nuts.

(See Illustration B, page 45)

NOTE: This will place the mower deck in a base measurement position. Additional adjustment may be required to achieve desired cut for the type of grass or conditions involved.

46

Page 45 Page 47
Page 46
Image 46
Dixon 17823-106 manual Mower Deck Leveling Procedure
Page 45 Page 47

17823-106 specifications

The Dixon 17823-106 is a versatile and robust product designed to meet the demands of modern applications. This innovative piece of equipment is particularly known for its reliability, ease of use, and advanced technology, making it an ideal choice for professionals across various industries.

One of the main features of the Dixon 17823-106 is its construction. Crafted from high-quality materials, this product ensures durability and longevity even in challenging environments. The rugged design is resistant to wear and tear, which is essential for maintaining operational efficiency in demanding settings, such as construction sites or industrial facilities.

A standout characteristic of the Dixon 17823-106 is its user-friendly interface. The product is designed for simplicity, enabling users to quickly learn and operate it without extensive training. This ease of use not only enhances productivity but also ensures safety by minimizing the potential for user error. With its intuitive controls and clear display, users can monitor performance and make adjustments on the fly, facilitating a smoother workflow.

In terms of technology, the Dixon 17823-106 incorporates advanced features that set it apart from competitors. The product is equipped with precision engineering that allows for enhanced performance, ensuring consistent output. Additionally, it may include smart connectivity options, enabling integration with other devices or systems for improved data analysis and operational oversight.

Another key feature is its adaptability. The Dixon 17823-106 is built to accommodate a range of applications, making it suitable for various sectors such as agriculture, manufacturing, and logistics. This versatility ensures that it can meet diverse customer needs without requiring additional modifications or accessories.

Moreover, the Dixon 17823-106 is engineered with safety in mind. Equipped with multiple safety features, it reduces the risk of accidents and promotes secure operation. This commitment to safety is vital, particularly in environments where equipment is used continuously and by different operators.

In conclusion, the Dixon 17823-106 is a highly efficient and dependable product that combines durability, user-friendliness, advanced technology, adaptability, and safety. These main features make it a valuable asset for any professional looking to enhance their operational capabilities while minimizing downtime and maximizing productivity.
Top Page Image Contents