CARE AND MAINTENANCE
! | CAUTION | HOT oil may cause burns. Allow engine to |
| cool before draining oil. | |
|
|
|
CHANGING THE ENGINE OIL
The EZ Drain oil plug is located on the left side of the engine crankcase.
1.Uncap the end of the drain plug and install the oil drain hose.
2.Place a suitable container under the drain hose.
3. | To drain, turn the drain plug | Cap | ||
|
|
|
| |
| Pull the plug outward until it |
|
|
|
| stops. |
|
|
|
3. | After engine is drained, |
|
|
|
|
|
| ||
| remove hose, recap end. |
|
| Latch |
| Push in and turn the plug |
|
| |
|
|
|
| |
clockwise to relatch.
4.Change oil filter.
5.Fill with oil (see steps below).
NOTE: Refer to engine manufacturer’s recommendations for frequency of oil changes.
OIL FILL
1.Clean any spilled oil from engine and chassis.
2.Refill engine with type, and quantity of oil recommended by the engine manufacturer in engine literature.
NOTE: Engine oil changes on the Grizzly will require replacement of the oil filter. These filters may be available from your local Dixon Dealer.
44
