OPERATION INSTRUCTIONS
MOWER DECK CUT HEIGHT LIFT LEVER
The lifting lever is used to place the mower deck in the transport position or one of the 18 different cutting heights.
The cutting height is set by placing a peg in the hole for the desired cutting height and the peg is then locked on the inside with the supplied pin.
1.To set the deck in the transport position, squeeze the underpin upwards to the lift handle and pull
the lever backward to the locked position (raised).
2.To set the deck for mowing, select the desired mowing height and place the lock pin into the matching hole. Secure on the inside with hairpin cotter. Squeeze the underpin upwards to the lift handle and push the lever forward to the lock pin. Release the lift handle.
3.The lift lever can also be
used to temporarily adjust the cutting height, such as when passing a minor bump in the lawn.
27
