TOA Electronics C-RM1000 CU operating instructions When selecting Transfer…, When selecting Erase…

When selecting “Transfer”…

1.Select [GROUP] while the menu is displayed and press the SET key. The setting content is displayed on the second line.

2.Select [2. TRANSFER] and press the SET key.

3.Select EITHER [RM RF] or [RM RF] and press the SET key. The “TRANSFERRING...” indication is displayed while data is being transferred, and the “TRANSFER COMPLET” indication is displayed when the transfer is completed.

[RM RF] : Transmits data to the interface unit.

[RM RF] : Receives data from the interface unit.

When selecting “Erase”…

1.Select [GROUP] while the menu is displayed and press the SET key. The setting content is displayed on the second line.

2.Select [ERASE] and press the SET key.

3.Select [YES] or [NO] and press the SET key.

[YES] : Deletes the setting and resets to default conditions.

[NO] : Does not delete the setting.

G R O U P

2. T R A N S F E R

T R A N S F E R

1. R M R F

G R O U P

3. E R A S E

Note

Default settings: Group: 1, DVR: 1 - 8, Control: ON, Number of the Channels: 16

12.4.2.Abbreviation [ Setting contents ]

		Programs the abbreviation numbers into the Remote Controller. The following two
1.	Setting	functions can be assigned to abbreviation settings: Quick display function and
		Function programming.
2.	Transfer	Transfers Abbreviation settings to other Remote Controllers via the C-RF1000
		Interface unit. Transfer method is the same as that of group settings.
3.	Erase	Erases all abbreviation settings. Function programming settings return to the
		default setting.

Note

Abbreviation settings programmed into a single Remote Controller can be easily transferred to multiple Remote Controllers. Set Monitor Lock for each Remote Controller.

If an abbreviation-set monitor is locked, camera images are displayed in full screen on an unlocked Monitor instead when the abbreviation-set monitor is called. So, you do not need to change the abbreviated number to call the unlocked monitor.

Follow the procedures below to perform settings.

1.Set Monitor lock for the monitor not to be operated by each Remote Controller. (Refer to p.50; Monitor Lock)

2.Program the abbreviation number setting into one Remote Controller. (Refer to p.42; Abbreviation, "Quick Display function.")

3.Transfer the abbreviation number settings to each Remote Controller. (Refer to p.41; When selecting "Transfer"...)

41