TOA Electronics C-RM1000 CU Handling Precautions, Connectable Equipment and Their Maximum Numbers

4. HANDLING PRECAUTIONS

•Do not connect the AC adapter when using the supplied modular cable since the power is supplied from the Digital Video Recorder.

•Do not connect the DVR Control Output Terminal A (RJ-11) to the telephone line.

•Do not lift the Remote Controller by joystick or subject the Controller to strong shocks. Damage may be caused to the Controller.

•To clean the front panel, wipe with a soft cloth. Do not use thinner or alcohol.

•The Remote Controller is designed for indoor use, and cannot be used outdoors.

5. CONNECTABLE EQUIPMENT AND THEIR MAXIMUM NUMBERS

5.1. Equipment that can be controlled by the Remote Controller

The following equipment can be controlled by the Remote Controller.

Communication method
Communications method Type A:	C-CC501, C-CC504, C-CC551, and C-CC554
Communications method Type A/B:	C-CC514, C-CC564, C-CC714, and C-CC764

Up to 16 cameras (9 cameras when the 9-channel Digital Video Recorder is used) can be connected per Digital Video Recorder for remote control.

Notes

•The Digital Video Recorder is required to perform control. Cameras cannot be connected directly to the Remote Controller for remote control.

•Avoid connecting more cameras than the number of Digital Video Recorder channels to the camera's control line. Any connected cameras exceeding the maximum number of available channels cannot be controlled.

•The combination camera available for type A and B is factory preset to type A (TOA-A). Use the DIP switch to change to Type B, as required. (Refer to p. 45; Camera Protocol.)

•Multiple combination cameras using different communication methods cannot be connected to a single digital video recorder. Match the communication methods of all connected cameras.

C-DR091 and C-DR161 Series Digital Video Recorders

Up to 8 C-DR091 or C-DR161 Series Digital Video Recorders can be connected to the Remote Controller to remotely control cameras. The Digital Video Recorder's Camera Protocol is factory-preset to Type A (TOA-A).

C-RF1000 Interface Unit

Connecting the C-RF1000 Interface Unit to the Digital Video Recorder permits up to 4 Remote Controllers to be connected. Connected remote controllers are operated on the last-in-first-out basis.

8