TOA Electronics C-RM1000 CU operating instructions Functions

2. GENERAL DESCRIPTION

TOA's C-RM1000 Remote Controller is used to remotely control TOA's 9-channel (C-DR091 series) or 16- channel (C-DR161 series) Digital Video Recorders. It can also remotely control operation of Combination cameras connected to the Digital Video Recorder. The C-RM1000 is equipped with a 3-axis joystick that permits main operation to be performed with one hand.

3. FUNCTIONS

Digital Video Recorder Control

Digital Video Recorder's recording and playback operation can be remotely controlled by the Remote Controller. It is also possible to display the Digital Video Recorder's menu to change settings.

Screen Display Operation

Camera images can be viewed in full-screen, 4-segment, 9-segment, or 16-segment split screen displays or in sequential displays. (Monitor 2 output can provide only full-screen, 4-segment split screen, and sequential displays.)

Combination Camera Operation

The Combination Camera's pan, tilt, and zoom operation, as well as focus and iris adjustments can be remotely controlled. It is also possible to display the Combination Camera's menu to change settings.

Preset Position Programming and Playback

The Combination Camera's preset positions can be easily programmed. Images set to the preset position can also be displayed on the monitor screen.

Abbreviation Number Function (Quick Display Function)

Digital video recorder numbers, camera numbers, and position numbers can be programmed into a function key (F1 - F4) or number (1 - 508). Pressing the programmed key or number permits the corresponding camera image to be displayed on the full screen.

Abbreviation Number Function (Function Programming)

Functions, such as Auto-focus, Auto operation, and electronic zoom, can be programmed into a function key (F1 - F4) or number (1 - 508).

Digital Video Recorder Grouping

Two or more cascade-connected Digital Video Recorders can be grouped, allowing images of all Digital Video Recorders in the group to be displayed on one master monitor. Further, multiple Digital Video Recorders can be viewed in sequential order through group sequence.

Password Setting

Accessible functions can be restricted by setting a password. There are 3 operation levels and different passwords can be set for each level.

Monitor Lock

Restricts operable monitors connected to the digital video recorder’s monitor outputs 1 and 2. This eliminates the necessity of operation for switching the monitors and prevents malfunctions.

7