TOA Electronics C-RM1000 CU Remote Controller connections using the dedicated cable

13.2.3. Connections between the Remote controller and the Digital video recorder

[C-RF1000 Interface Unit Connections]

The maximum cable length is 1.2 km (3,937 ft) for each distance between the Remote Controller and the Interface Unit and between the Interface Unit and the farthest Digital Video Recorder.

The maximum cable length is 1.2 km (3,937 ft) for each distance between the Remote Controller and the Interface Unit.

	Interface unit
	C-RF1000
Remote controller 1	Screwless terminal
	1	B
Remote controller 2	Screwless terminal	REMOTE CONTROLLER INPUT-	(Screwless terminal)
Remote controller 3	Screwless terminal
*1
Remote controller 4	Screwless terminal
	432
*2
	RS-232C
	PC

Notes

*1. Match the transmission rate of all components connected to the Interface Unit. The Interface Unit's DIP switch settings must also be identical with the Remote Controller's bit rate settings.

*2. Remote Controller Input Terminal 4 cannot be used simultaneously with the RS-232C port. Connect either.

[Remote Controller connections using the dedicated cable]

The maximum cable length is 1.2 km (3,937 ft) for distance between the Remote Controller and the Digital Video Recorder of which termination switch is set to ON.

No AC adapter required			Termination switch: OFF			Termination switch: OFF			Termination switch: ON
	Remote			Digital Video			Digital Video			Digital Video
	Controller			Recorder			Recorder			Recorder
	RJ-11		RJ-11		Screwless	Screwless		Screwless	Screwless
	terminal	Power supply	terminal		terminal	terminal		terminal	terminal

Supplied modular cable (3 m (9.8 ft))

CPEV-S larger than AWG22 (Ø0.65 mm)

Note: Do not connect the AC adapter.

55