TOA Electronics C-RM1000 CU Basic Setting Operations, Displaying the menu, Closing the menu

12.3. Basic Setting Operations

Here, basic operating procedures for each setting item are described. Enter a password to log in to Operation Level 1 and display the Remote Controller’s menu. Refer to p. 33; Log-in and Log-out for the log-in method.

12.3.1. Displaying the menu

Note

While the digital video recorder is displaying each menu (Search Menu, Triplex Menu, or Archive Menu) or while the combination camera’s camera menu is being displayed by the remote controller, the remote controller’s menu cannot be activated even if the remote controller’s menu key is pressed.

1.Hold down the Menu key for 2 seconds or more. If no password has been set, the Remote Controller’s menu screen is displayed.

2.Select “RM MENU” using the joystick.

3.Rotate the joystick clockwise or press the SET key to confirm the selection.

The menu screen is displayed.

12.3.2. Operation during menu display

1. Select the setting item using the joystick.

MENU

SHIFT

SET

P A S S W O R D

L O G O U T

P A S S W O R D

R M M E N U

G R O U P

(Example)

2.Confirm the selected setting item by rotating the joystick clockwise or using the SET key. Rotate the

joystick counterclockwise or press the C key to

B U Z Z E R 1 . O N

B U Z Z E R

cancel the selection.

SET

1. O N

3.Select the setting contents using the joystick.

4.Press the SET key to confirm the selected setting contents.

B U Z Z E R 2 . O F F

5. To continue settings of other items, repeat Steps 2-5. Hold down the Menu key again for 2 seconds or more to return to the normal screen after setting completion.

Note

Numerals can be entered using the joystick or numerical keypad.

12.3.3. Closing the menu

SET

B U Z Z E R 2 . O F F

Hold down the Menu key for 2 seconds or more while the menu is displayed. The display reverts to the screen shown before the menu was displayed.

39