2b
CONVERSION TO LP/PROPANE GAS
Every range is provided with a set of injectors for the various types of gas.
Select the injectors to be replaced according to the “INJECTORS TABLE”.
The nozzle diameters, expressed in hundredths of a millimetre, are marked on the body of each injector.
SETTING THE PRESSURE REGULATOR (fig. 2.5)
The pressure regulator is accessible through the storage compartment by opening the bottom pivoting panel; the pressure regulator is positioned on the rear left side of the range.
To set the pressure regulator:
1.Unscrew the regulator cover;
2.Unscrew the A component, reverse and screw it according to the LP/PROPANE regulation.
Pressure regulator
LP/PROPANE
REGULATION
NATURAL GAS
REGULATION
REGULATOR
COVER
1 
2
A component
Fig. 2.5
19
