Fisher & Paykel OR36SDBGX ANTI-TIP Stability Device Installation Instructions, 455

a1

YOU MUST USE STABILITY ANTI TIP BRACKET TO PREVENT UNIT FROM TIPPING.

ANTI-TIP STABILITY DEVICE INSTALLATION INSTRUCTIONS

1.The anti-tip bracket has to be attached as shown on figure below, it has to be fixed on the rear wall by no. 2 (two) suitable screws (supplied with the anti-tip kit).

2.After fixing the anti-tip bracket, slide range into place. Be sure the anti-tip bracket is fully inserted in the slot of the range back.

ANTI-TIP STABILITY DEVICE FIXING

Anti-tip stability device

17"	15/16
.5 mm)
(455

26" 11/16 (678 mm) from top of cooktop with range installed in final position

17"	15/16
.5 mm)
(455

Dotted line showing the position of the range when installed

Slot for inserting the anti-tip bracket

Fig. 1.10

12