Chapter 5 Software Tools Program
Installation
To install the Site Master Software Tools program:
Step 1. Insert the Anritsu Site Master Software Tools disk in the CDROM drive. Step 2. From the Windows Start menu, select Run .
Step 3. Type: X:\Setup.exe where X is the drive letter of your CDROM drive.
Step 4. When prompted, press the Enter key to accept the default directory C:\Program Files\Site Master Software Tools and the installation will begin.
Step 5. When the installation is complete, pres Enter to restart Windows.
The readme.doc file on the disk provides updated information about the program, and the Help function provides detailed operating information.
Communication Port Setting
The Site Master Software Tools communicates with the Site Master through a standard se- rial COM port on the PC. Set the baud rate of the COM port to 115200.
Step 1. Select Start, Programs and select Site Master Software Tools.
Step 2. When the program has loaded, select Settings, Communication.
Step 3. Select the appropriate PC COM port and Transfer Baud Rate for your system, and click OK.
Figure
