Chapter 2 Functions and Operations
| LIMIT | Pressing LIMIT on the data keypad activates a menu of limit related functions. |
|
| Use the corresponding softkey to select the desired limit function. Then use the |
|
| Up/Down arrow key to change its value, which is displayed in the message area |
|
| at the bottom of the display. |
|
| Choosing LIMIT causes the soft keys below to be displayed. |
|
| SINGLE LIMIT — Sets a single limit value in dBm. Menu choices are: |
|
| ON/OFF |
|
| EDIT |
|
| BACK |
|
| MULTIPLE UPPER LIMITS — Sets multiple user defined upper limits, and |
|
| can be used to create an upper limit mask for quick pass/fail measurements. |
|
| Menu choices are: |
|
| SEGMENT 1 |
|
| SEGMENT 2 |
|
| SEGMENT 3 |
|
| SEGMENT 4 |
|
| SEGMENT 5 |
|
| BACK |
|
| |
|
| MULTIPLE LOWER LIMITS — Set multiple user defined lower limits, and |
|
| can be used to create a lower limit mask for quick pass/fail measurements. |
|
| Menu choices are: |
|
| SEGMENT 1 |
|
| SEGMENT 2 |
|
| SEGMENT 3 |
|
| SEGMENT 4 |
|
| SEGMENT 5 |
|
| BACK |
|
| LIMIT BEEP — Turns the audible limit beep indicator on or off. |
MARKER Choosing MARKER causes the soft keys, below, to be displayed and the corre- sponding values to be shown in the message area. Selected frequency marker or distance marker values may be changed using the keypad or Up/Down arrow key.
M1 — Selects the M1 marker parameter and opens the M1 marker second level menu.
ON/OFF — Turns the selected marker on or off.
EDIT — Opens the selected marker parameter for data entry. Press ENTER when data entry is complete or ESCAPE to restore the previous value.
MARKER TO PEAK — Places the selected marker at the frequency or distance with the maximum amplitude value.
MARKER TO VALLEY — Places the selected marker at the frequency or distance with the minimum amplitude value.
BACK — Returns to the Main Markers Menu.
M2 through M4 — Selects the marker parameter and opens the marker second level menu.
ON/OFF — Turns the selected marker on or off.
2 - 12
