TOA Electronics C-RM1000 CU Key operation tone, 12.4.10. I/O Speed, DVR check

12.4.9. Key operation tone

The tone generated whenever the key is pressed can be set to sound or not to sound.

1.Select [KEY CLICK ON/OFF] while the menu is displayed and press the SET key.

The setting content is displayed on the second line.

2.Select the setting content and press the SET key.

[Setting Contents]

K E Y C L I C K O N / O F F

1O N

1.	ON	The key operation tone is sounded when the key is pressed.
2.	OFF	The key operation tone is not sounded when the key is pressed.

(Factory-preset to ON.)

12.4.10. I/O Speed

Set the DVR control output terminal's transmission rate. (Factory-preset to [38400].)

1.Select [I/O SPEED] while the menu is displayed and press the SET key.

2.Tilt the joystick to the left or right to select the transmission rate: [9600], [19200] or [38400].

I/ O S P E E D

3 8 4 0 0

Note

Set the same transmission rate for the components connected to the control terminal. The Digital Video Recorder (C-DR091 and C- DR161 Series) and the C-RF1000 Interface Unit are factory preset to 38400 bps.

3. Press the SET key to confirm the selected transmission rate.

12.4.11. DVR check

Check the Digital Video Recorder connected to the control terminal.

Select [DVR CHECK] while the menu is displayed and press the SET key.

The connected Digital Video Recorder number is displayed.

Note

Performing the DVR check during cascade connection displays all connected Digital Video Recorder numbers. If the number of the connected Digital Video Recorder is not displayed, communications may not have been established. In such cases, check to see if:

I/ O S P E E D

1 9 2 0 0

D V R C H E C K

•The connection terminal is correctly connected.

•The Remote Controller’s transmission rate matches that of the Digital Video Recorder.

•The Digital Video Recorder’s DVR-ID number is correctly set.

49