Kramer Electronics VP-725NA Operating via the Infrared Remote Control Transmitter, Key Function

7.4Operating via the Infrared Remote Control Transmitter

You can control the VP-725NAremotely, from the infrared remote control transmitter (that has a range of up to 15 meters and is powered by two AAA size

1.5V DC batteries), as defined in Figure 29:

Figure 29: Infrared Remote Control Transmitter

Key	Function
Freeze	Pauses the output video
Power	Cycles power
Blank	Toggles between a blank screen (blue or black
	screen) and the display
Mute	Mutes the audio output
MIX	Routes the combined signals from the Mic and
	the Line to the Master output
Talk Over	Routes the selected input to the output until an
	audio signal is detected on the microphone input
Over Ride	Routes the signal from the microphone to the
	Master output instead of from the Line, whose
	signal is blocked
Audio Level	Set the audio level
Video Group	Selects the Video group operation mode
Audio Group	Select the Audio Group operation mode
Scaler	Selects the Scaler operation mode
Master Audio	Select the Master Audio operation mode
PIP	Toggles the picture-in-picture function and
	illuminates/turns off the PIP button
PIP Size	Toggles the PIP size
SWAP	Toggles between the PIP content and the
	parent screen content
PIP Source	Selects the PIP source
	Press the PIP Source key and then an input key
	Assesses the image and improves the quality
Auto Image	accordingly, by automatically adjusting the
	phase, frequency and position
OSD	Activates/deactivates access to the OSD Menu
Picture	Opens the Picture menu
	Opens the menu on the LCD display and if the OSD
	button illuminates, opens the relevant OSD
Menu	Opens the Main menu
Navigation	Allows maneuvering within an OSD screen (left,
Arrows	right, up and down, as well as the Enter arrow at
	the center)
USB	Selects the USB source (JPEG files on a USB
	memory stick)
Capture	Captures an image to place as a logo or background
VGA	Selects the VGA (UXGA) source (from 1 to 4)
HDMI	Selects the HDMI source (from 1 to 4)
CV	Selects the CV source (from 1 to 4)
YC	Selects the YC source (from 1 to 4)
YPbPr	Selects the YPbPr (COMP) source (from 1 to 4)

VP-725NA - Configuring and Controlling the VP-725NA 47