Kramer Electronics VP-725NA user manual The Slideshow Feature

Setup Screen

Setting Function

Default

HDMI Switch	Set to DVD/Normal or PC/Bypass: Normal/Bypass	Normal
Behavior	When an EDID file update is required, set the EDID protection to OFF
HDMI Input	Set to On or Off for each HDMI input	ON
HDCP	HDCP support can be enabled (On) or disabled (Off) for each of the
	HDMI inputs, allowing the source to transmit a non-HDCP signal if
	required (for example, when working with a Mac computer)
HDMI Group	Set to On or Off	ON
Output	Set to On to enable the HDMI group or to Off to disable the HDMI
	group

7.1.6The Slideshow Feature

The VP-725NAlets you run a slideshow via the USB input and set the slideshow speed via the slideshow feature.

To prepare a slideshow:

1.Load the slideshow JPEG images to a USB memory stick.

The slides appear in alphabetical order.

JPEG files are recognized up to 2048x1536.

2.Open the Setup menu and set the desired speed in the slideshow item and then close the menu.

3.Connect the Memory stick to the USB connector on the front panel.

4.Select the USB INPUT button on the front panel. The slideshow begins at the set speed.

iBefore you run the slideshow, you must set the slideshow parameters

You can control the slide show by pressing the:

•FREEZE button to pause

•USB button to play and stop the slideshow

•Up button to go to the previous slide

•Down button to go to the next slide

40 VP-725NA - Configuring and Controlling the VP-725NA