Kramer Electronics VP-725NA user manual Comp Output BNC

12

- VP 725NA – Overview

Rear Panel

#	Feature			Function
9	PROGRAM USB Connector			Connect to upgrade to the latest audio firmware
10	ETHERNET port			Connects to your LAN
11	RS-2329-pin D-sub Connector			Connects to a PC or Serial Controller
12	MASTER OUT Terminal Block Connector			Connects to the routed balanced audio channel
13	COND. MIC / DYN. MIC Button			Pushed in selects a dynamic microphone, released selects a
				condenser microphone
14	MIC IN XLR Connector			Connects to the microphone
15	UXGA IN 15-pin HD Connectors			Connects to the UXGA (analog interface) graphics sources (from 1 to 4)
16	UXGA OUT 15-pin HD Connector			Connects to the UXGA (analog interface) graphics acceptor
17	CV IN BNC Connectors			Connects to the composite video sources (from 1 to 4)
18	CV OUT BNC Connector			Connects to the composite video acceptor
19	YC IN 4-pin Connectors			Connects to the s-Video (Y/C) sources (from 1 to 4)
20	YC OUT 4-pin Connector			Connects to the s-Video (Y/C) acceptor
21	HDMI IN Connectors			Connects to the HDMI sources (from 1 to 4)
22	HDMI OUT Connector			Connects to the HDMI acceptor
23	COMP Input		G/Y
24	BNC Connector		B/Pb	Connect to the component video source or RGB source from (1 to 4)
25			R/Pr
26	COMP		G/Y
27	OUTPUT BNC		B/Pb	Connect to the component video or RGB acceptor
	Connector
28			R/Pr
29	OUPUTS	HDMI Connector		Connects to the HDMI acceptor
30		Connector		Connects to the UXGA (analog interface) graphics acceptor
		UXGA 15-pin HD Connector
31		BNC	R/Pr
32	SCALED		H
33			G/Y	Connect to the component video or RGBHV acceptor
34			V
35			B/Pb
36	Power Connector with FUSE			AC connector enabling power supply to the unit