Kramer Electronics VP-725NA user manual Audio Screen Setting Function Default

7.1.3The Audio Screen

Figure 18 defines the Audio screen.

Figure 18: Audio Screen

Audio Screen

Setting Function

Default

Mic Control	Set the microphone control mode:All off, Override, Mix, Talkover			All off
Bass	Adjust the bass: -40 to 40			0
Treble	Adjust the treble: -40 to 40			0
Balance	Adjust the balance: -25 to 25			0
Loudness	Set the loudness: On/Off			Off
Delay	Define the delay type: Dynamic or User Define			Dynamic
	Dynamic means that the audio delay is equal to the pipeline video delay
User Delay	Available when selecting the User Defined delay: 0 to 120 (msec)			0
	In steps of 1msec
USB Audio	Select the USB audio source to follow the USB signal: No Audio,
Source	VGA (from 1 to 4), Comp (from 1 to 4), YC (from 1 to 4), CV (from
	1 to 4)
Audio Level	Adjust the audio input and output gains for each group
	(abbreviated as “Grp” in the OSD), see Figure 19:
	VGA Grp In	VGA Grp Out	HDMI Grp In
	HDMI Grp Out	Comp Grp In	Comp Grp Out
	YC Grp In	YC Grp Out	CV Grp In
	CV Grp Out	Master In	Master Out
	Mic In
	The audio level range for the Master Out and for the Mic In is from -100
	to 24; for the Master In and group inputs and outputs it is from -30 to 10

36 VP-725NA - Configuring and Controlling the VP-725NA