Kramer Electronics VP-725NA user manual Connect the power cord not illustrated in Figure

Connect the UXGA connector to the UXGA acceptor, for example, a monitor (not illustrated in Figure 3)

7.Connect the MASTER OUT terminal block connector to the balanced audio input on the audio amplifier, and route the audio input (corresponding to the converted video input) to the MASTER OUT.

8.Connect the power cord (not illustrated in Figure 3).

We recommend that you use only the power cord that is supplied with this machine.

9.If required connect:

A PC (see Section 5.3).

The Ethernet port (see Section 5.4).

Figure 3: Connecting to the VP-725NA Presentation Switcher/Scaler

16 VP-725NA - Connecting the VP-725NA Presentation Switcher/Scaler