Kramer Electronics VP-725NA user manual Front Panel Feature Function, Usb

- VP 725NA – Overview

9

Front Panel

#	Feature		Function
1		YC	Selects one of the s-Video (Y/C) sources (from 1 to 4)
2		CV	Selects one of the CV sources (from 1 to 4)
3	INPUT	UXGA	Selects one of the UXGA sources (from 1 to 4)
	SELECT
4		HDMI	Selects one of the HDMI sources (from 1 to 4)
	OR
5		USB	Press to select the USB source
	Buttons
			JPEG files on a USB memory stick, up to a maximum size of 2048x1536
6		COMP	Selects one of the component video sources (from 1 to 4)
7	POWER Switch		Illuminated switch for turning the unit ON or OFF
8	IR Receiver/LED		Green when ON; red when OFF
			OFF in this case means that the outputs and the front-panel are disabled
9	FREEZE Button		Freezes the output video image
			Applicable to the Scaler outputs only
10	PIP Button		Selects the picture-in-picture function (see Section 6.4 )
11	MENU Button		Displays the OSD Menu screen (or returns to the previous level in the OSD screen)
12	ENTER Button		Moves to the next level in the OSD screen
			Press for about 3 seconds to lock/unlock the front panel buttons
13	- Button		Decreases the range by one step
14	+ Button		Increases the range by one step
15	DOWN Button		Moves down one step (in the same level) in the OSD screen
16	UP Button		Moves up one step (in the same level) in the OSD screen
17	USB Connector		Connect to a USB drive to read JPEG files
18	OSD ON Button		Activates/deactivates access to the OSD Menu
			The OSD ON front panel button is activated (illuminated) by default, and pressing the MENU front panel
			button (or the MENU key on the infrared remote control transmitter (see Figure 29)) displays the OSD
			Menu. To prevent OSD display, press the OSD ON front panel button (or the OSD key). The front panel
			button no longer illuminates, and the front panel LCD now operates independently of the OSD (when the
			OSD is OFF, the LCD is still operational)
19	LCD Status Display		Displays the status