TROUBLESHOOTING
ELECTRICAL SYSTEM: |
|
|
SITUATION | CAUSES | REMEDY |
Starter will not | Circuit breaker engaged | Push button to reset Consult |
turn engine over |
| your dealer for repair |
|
|
|
Starter will not | Dead battery | Charge battery |
turn engine over |
|
|
|
|
|
Battery discharge | Poor connections on | Tighten or replace as required |
| battery Battery water low |
|
| Wrong battery installed |
|
| in mower |
|
|
|
|
Battery discharge | Engine electrical system | Have electrical system checked by |
| not functioning correctly | your dealer |
|
|
|
Battery discharge | Engine being operated | Increase engine RPM Contact your |
| at too low an RPM | dealer for information |
|
|
|
Electric clutch will | Low battery condition | Repair or replace as required |
not engage mower | Poor connections on | Consult your dealer for repair |
deck blades | clutch switch Broken |
|
| wiring |
|
NOTE: Electrical system failures are generally simple in nature, always check the obvious first and then move onto the more complicated parts used. Poor battery service, loose connections, corrosion, frayed or broken wiring, are more likely than component failure.
Page 25
