1
2
CONTROls
23
Cutting Height Pedals
The cutting height pedals release the deck lift to allow
setting the desired deck height. Apply pressure to the
lift pedal and rotate foot to also apply pressure to the
release pedal, unlocking the deck lift.
For transport, push the lift pedal fully forward until the
deck lift latches in the transport (highest) position.
8065-017
1. Lift pedal
2. Release pedal
Cut height selection pedals
8066-002
Choke control
Choke Control
The choke control is used for cold starts to provide
the engine with a richer fuel mixture.
For cold starts the control should be pulled out to its
extent.
As the engine reaches operating temperature,
gradually push the choke in (normal operating choke
position).
Fuses
Fuses are located on the right hand side of the
machine. They are accessed by tilting the seat
forward. Fuses are at pin fuses type as used in
automobiles.
There are three fuses with ratings and functions:
20 A, Primary fuse.1.
7.5 A, Mower deck coupling.2.
10 A, Accessories3.
8011-420
Fuses