Panasonic TH 65PZ850U Power Off the external equipment, more than 3 seconds, remote control, 3 4

Programming the Remote to Operate Peripheral Equipment

You can operate other manufacturers’ equipment using this TV’s remote control.

1	Connect the external equipment to the TV and
	Power Off the external equipment
2		Press both buttons simultaneously for
	+	more than 3 seconds.

•Release the buttons when the equipment selection buttons start flashing.

3 4 5 ■Press to return to the TV mode

Select the equipmentwith the equipment selection button

•The selected button remains lit (other buttons are not lit).

Input the equipment’s 4-digit remote control code (p. 51-52)Operate the equipment with the remote control (p. 50)•The external equipment turns On.■If the equipment does not operate with the

remote control

•	When your equipment has a single code
	Input the remote control code again
•	When your equipment has multiple codes
	Change the code with above and test again

Caution

•Registration will fail if the wrong code is input or it takes more than 30 seconds to register.

To find a code not listed in the code list

This procedure searches all codes and is called the “sequence method.”

After step above, change the code and test

change

Operate the equipment with the remote control (p. 50)

•Repeat until the code is found

•It may take many attempts before the correct code is found

When the correct code is found

store

Programming the Remote to Operate Peripheral Equipment Using Timer

Advanced

47