Dixon ZTR 2700, 12828-0603 manual Parking Brake Adjustment

CARE AND MAINTENANCE

PARKING BRAKE ADJUSTMENT

1.Raise rear of machine.

2.Remove tire and wheel assembly.

3.Adjust the 3/8” adjustment nut clockwise to increase and counter-clockwise to decrease brake holding power. As the brake holding power is increased, the force required on the handle to engage the brake increases.

4.Set the brake for the holding power required for the intended use and the desired force required to activate it.

5.Install wheel & tire assembly.

6.Repeat steps 2-5 for opposite side.

32