Dixon 13631-0702 manual Troubleshooting, Engine Runs But Mower Won’T Move Forward, Drive System

Models: 13631-0702 ZTR 3363

1 44
Download 44 pages 50.86 Kb
Page 41
Image 41

TROUBLESHOOTING

6.ENGINE RUNS BUT MOWER WON’T MOVE FORWARD

Drive belt broken or slipping- - - - - - - - - - - - - - - - - - - - replace drive belt Bad transmission- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - consult dealer

7.MOWER LOSES POWER OR TRANSMISSION OVERHEATS

Engine air filter-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -clean or replace Transmission damage- - - - - - - - - - - - - - - - - - - - - - - - - - - - - consult dealer

8.ENGINE STALLS WHEN BLADES ARE ENGAGED

Operator not on seat- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -sit on seat Faulty interlock system- - - - - - - - - - - - - - - - - - - - - - - - - - - - - consult dealer Bad blade spindle bearing - - - - - - - - - - - - - - - - - - - - - - - - -consult dealer Deck drive belt not properly routed- - - - - - - - - - - - - - - - - - - - - - - reroute Blades blocked by foreign material - - - - - - - - - - - - - -clean under deck

9.DRIVE SYSTEM

Low on power- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - check belt tension Mower pulls to side - - - -check tire inflation/adjust control linkage Mower creeps in neutral- - - - - - - - - - - - - - - - - - - -adjust control linkage

10.CUT QUALITY

Skips in spots- - - - - - - - - - - - check for loose belt/slow ground speed Cut uneven left to right - - - - - - - - -check tire inflation/level the deck Poor dispersal of grass- - - - - - - - - - -clean deck/check for loose belt Ends of grass blades are ragged- - - - - - - - - - - - - - - - - -sharpen blades

41

Page 41
Image 41
Dixon 13631-0702 Troubleshooting, Engine Runs But Mower Won’T Move Forward, Mower Loses Power Or Transmission Overheats