175
7
Appendices

7 Appendices

If an error message is displayed on the screen, take the
corresponding action.
Troubleshooting

Error Messages

Error Message Cause and Action Refer to
Insert Card No card is loaded. Insert a card. P.24
Set Date. The date is not set. Set the date. P.154
File Number Over Limit The file number limit has been exceeded. Use another card. P.152
Unmatched File The camera cannot display this file. Check the file contents
on your computer, and then delete the file.
-
Insufficient Memory. Continue? Because there is not sufficient capacity on the card, all the
files cannot be copied. Use another card.
P.21
Protected You are trying to delete a protected file. P.115
Card Is Write-Protected. The card is “Locked (write-protected)”. Unlock the card. P.21
Print settings cannot be set for this
file.
This file (movie or other file) cannot be selected for printing. -
Insufficient Memory/Capacity
Short
Files cannot be stored. Make sure there is enough free
space or delete unwanted files.
P.52
P.135
P.136
The image print number limit has been exceeded. Select an
image and set the number to 0.
-
Format internal memory You must format the internal memory. P.136
Format card The card is not formatted. Format the card with this camera. P.135
Card Error Reformat the card. If, after doing so, the error message still
appears, the card may be faulty. Do not use the card.
P.135
Writing Data Writing file to memory. Wait until writing finishes. -
No File There are no files that can be played back. -
Cannot Record The number of remaining shots is 0. Switch to another card
or the internal memory.
P.21
No files to restore. There are no files to restore. P.123