TROUBLESHOOTING
Our Bikes are designed to be reliable and easy to use. If, however, you have a problem, these troubleshooting steps may reveal the cause.
PROBLEM: The console does not light up.
SOLUTION: Check to make sure the power switch located on the backside of the console is turned on.
SOLUTION: Make sure the power adapter is plugged into the base of the bike.
SOLUTION: Make sure the wire harness is plugged into the back of the console.
PROBLEM: The bike is making a clicking noise.
SOLUTION: Using the pedal wrench supplied with your bike, remove both the left and right pedals, apply grease to the threaded portion and reassemble the pedals onto the bike. Make sure the pedals are tight. SOLUTION: Make sure the pedal straps or your shoe laces are not hitting the side cover.
SOLUTION: Assure seat adjustment is tight (Page 8)
PROBLEM: The bike makes a squeaking or creaking noise.
SOLUTION: Check and tighten all hardware.
NOTE: If the above steps fail to remedy the problem, discontinue use, turn the power off and contact your retailer.
G E N E R A L
29
