E 3 1 0 0 R 2 1 5 0
DEFAULT SETTINGS (R2150/E3100ONLY)
Use this optional USER SET Mode to set default values or view accumulated variables.
ENTERING AND USING USER SETMODE
•Press and hold the UP ▲ and DOWN ▼ buttons simultaneously for five seconds.
•You will hear a series of beeps and the display will read USER SET. You are now in USER SET Mode.
SETTING DEFAULT WORKOUT TIME
•Press START to change Default Time.
•The TIME (top left) window will be flashing the current default time. Use the UP ▲ and DOWN ▼ buttons to change to your desired default time.
•To save changes, press and hold START for approximately three seconds.
•Push ENTER to go to Default Level.
SETTING DEFAULT RESISTANCE LEVEL
•The LEVEL (top right) window will be flashing the default resistance level. Use the UP ▲ and DOWN ▼ buttons to change to your desired default level.
•To save changes, press and hold START for approximately three seconds.
•Press and hold ENTER for approximately three seconds to exit default setting mode.
26
