Bunn TITAN DUAL manual Factory Defaults, Procedure to set factory defaults, You Sure?

PROGRAMMING THE BREWER (cont.)

PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)

FACTORY DEFAULTS

This function allows the operator to erase ALL of the previously entered recipes and ad messages. Factory-set default values will replace ALL previous settings.

Procedure to set factory defaults:

1.Press and hold the right hidden button until the display reads SET LANGUAGE. Press the right hidden button until the display reads FACTORY DEFAULTS.

2.Pressing NO will return to the MAIN SCREEN. Press YES to restore defaults. The display will read WILL REPLACE ALL BREW SETTINGS followed with ARE

YOU SURE?

3.Pressing NO in this confirmation screen will revert to the MAIN SCREEN without resetting the brew- ing setups to the defaults. Press YES to load the defaults. After factory defaults have been restored, the display will return to the MAIN SCREEN. The factory default valves will have replaced ALL previ- ously entered values. It will NOT reset the life brew counter. If factory defaults are restored, it will be necessary to recalibrate the flow rates. Refer to pages 30-31.

FACTORY DEFAULTS

NO YES

PRESSING NO WILL

RETURN TO

MAIN SCREEN

WILL REPLACE ALL

BREW SETTINGS

ARE YOU SURE?

NO YES

PRESSING NO WILL

RETURN TO

MAIN SCREEN

REPLACES ALL

PREVIOUS SETTINGS

Page 44 40119 071107