Bunn TITAN DUAL manual PROGRAMMING FUNCTIONS - LEVEL 2 cont. BREW SETTINGS cont DRIP TIME

PROGRAMMING THE BREWER (cont.)

PROGRAMMING FUNCTIONS - LEVEL 2 (cont.) BREW SETTINGS (cont.)

DRIP TIME

This function allows the operator to adjust the DRIP TIME (time from end of sprayhead flow to when liquid stops dripping from the funnel). When the brew cycle is complete, the display will show DRIPPING and will countdown the time until the funnel empties.

Setting DRIP TIME:

Range: OFF to 5 minutes for both batch sizes.

NOTE: If the brewer is already in the DRIP TIME screen, skip steps 1 through 9 and proceed directly to step 10.

1.Press and hold the right hidden button until the dis- play reads SET LANGUAGE. Press the right hidden button until display reads BREW SETTINGS ?.

2.Press YES to proceed. The display should now read LEFT SIDE, along with MODIFY SHOW NEXT.

3.Press and release the right hidden button until display reads DRIP TIME: X:XX. A batch light will be blinking.

4.Using the (-)and (+), set the amount of time from when the brew solenoid shuts off to when drip-out occurs for that batch size.

5.When finished, press the other batch size and repeat step 4.

6.When finished, press DONE. The display should read 2 BATCHES DONE?

7.If both batch sizes are not correct, press and release NO to return to the DRIP TIME setup screen and repeat steps 4, 5 and 6.

8.If both batch sizes are correct, press YES. The display should read LEFT SIDE SETUP COMPLETE. After a 5 second delay, the display will advance to

REVIEW SETTINGS ?.

9.Press YES to scroll through all left brew settings. If all brew settings are correct press NO. The display should read COPY SETTINGS ?.

10.If NO is pressed, display will advance to RIGHT SIDE, along with MODIFY SHOW NEXT; proceed to step 13. If YES is pressed, display should read

LEFT->->->-> RIGHT

11.If NO is pressed, display will advance to RIGHT SIDE, along with MODIFY SHOW NEXT; proceed to step 13. If YES is pressed, display should read

ARE YOU SURE ?.

12.If NO is pressed, display will advance to RIGHT SIDE, along with MODIFY SHOW NEXT. If YES is pressed, display should read PLEASE WAIT, along

with COPYING L ->->->-> R. After a short delay display will read RIGHT SIDE, along with MODIFY SHOW NEXT.

13.If left settings were copied to the right side press NEXT to advance display to XXX REFILL XXX. If left brew settings were not copied to the right side, press MODIFY and repeat the BREW SETTING pro- cedure used to set the left side. To exit to the MAIN SCREEN, press and release either ON/OFF button.

Page 25 40119 071107