Bunn TITAN DUAL manual BREW SETTINGS cont, Next, Press YES to proceed. The display should now

PROGRAMMING THE BREWER (cont.)

PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)

BREW SETTINGS (cont.)

Procedure to set or modify % Bypass settings. Range: 0 to 90% for both batch sizes

1.	Press and hold the right hidden button until display
	reads SET LANGUAGE. Press the right hidden but-
	ton until display reads BREW SETTINGS ?.
2.	Press YES to proceed. The display should now

BREW SETTINGS ?

NO YES

PRESSING NO WILL	LEFT SIDE
ADVANCE TO NEXT
FUNCTION SCREEN	MODIFY SHOW NEXT

read LEFT SIDE, along with MODIFY, SHOW and

NEXT.

3. Press and release the right hidden button until

display reads % BYPASS XXX.X. A batch light will be blinking.

4. Using (-)and (+), set the amount of bypass water (percentage) to be dispensed around the gounds for that particular batch size.

SET BOTH

BATCH SIZES

PRESS AND RELEASE

RIGHT HIDDEN SWITCH

UNTIL DISPLAY READS:

%BYPASS XXX.X (-) DONE (+)

5.When finished, press the other batch size and repeat step 4.

6.When finished setting both batch sizes, press DONE. The display should read 2 BATCHES DONE?

7.If both batch sizes are not correct, press NO to return to the % BYPASS: setup screen and repeat steps 4, 5 and 6.

8.If both batch sizes are correct, press YES. This will advance to L BREW METER. To exit to the MAIN SCREEN, press and release either ON/OFF button.

2 BATCHES DONE ?

NO YES

L BREW METER X

- I+

Page 21 40119 071107