Bunn TITAN DUAL manual Brew Counters, Procedure to view/reset the brew counters

PROGRAMMING THE BREWER (cont.)

PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)

BREW COUNTERS

This function allows the operator to track the total num- ber of brew cycles completed, as well as the number of batches brewed using each of the brew buttons. There are four resettable counters, and one life counter that is not resettable.

Procedure to view/reset the brew counters:

1.Press and hold the right hidden button until the dis- play reads SET LANGUAGE. Press the right hidden button until the display reads BREW COUNTERS.

2.Pressing NO will advance to the next programming function, ENABLE ADS ?. Press YES to view the first brew counter (TOTAL LIFE BREWS). This number represents the total number of brew cycles this brewer has completed. This counter is non-reset- table. Press NEXT to advance to the next brew counter, <- <- BREW FULL (left side).

3.This counter represents the number of brews for aFull Brew on the left side of the brewer. To reset the counter to zero, press and release RESET. Press and release NEXT to advance to the next counter.

4.Repeat step 3 for the remaining left counter, BREW HALF.

5.Repeat step 4 for the two right side brew coun- ters.

6.When finished, press NEXT to advance to the next programming function, ENABLE ADS ?. To exit programming, press and release either ON/OFF button to return to the MAIN SCREEN.

BREW COUNTERS?

NO YES

PRESSING NO WILL

ADVANCE TO

ENABLE ADS ?

TOTAL LIFE BREWS

XXXX NEXT

<- <- XXX BREW FULL

RESET NEXT

<- <- XXX BREW HALF

RESET NEXT

BREW FULL XXX -> ->

RESET NEXT

BREW HALF XXX -> ->

RESET NEXT

ENABLE ADS ?

NO YES

Page 32 40119 071107