PROGRAMMING THE BREWER (cont.)
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
ENABL CLEAN
This function allows the operator to enable the sanita- tion function and set the time before a cleaning alert will be displayed.
Procedure for enabling clean:
Range: 0.0 to 72.0 hrs
1.Press and hold the right hidden button until the display reads SET LANGUAGE. Press the right hid- den button until display reads ENABL CLEAN?. The YES or NO will be flashing to indicate the current selection.
2.Press and release the NO button to disable this function (no clean alert will be displayed on the screen), or:
3.Press and release the YES button to enable this function (a clean alert will be displayed on the screen).
4.When finished, press and release DONE to save the new setting and advance to the next function screen.
5.If NO was selected, the display should now read Enabl EnergySavr. To exit programming and return to the MAIN SCREEN, press and release either ON/OFF pad.
6.If YES was selected, the display should now read X.X HRS
NOTE: The timer will not begin until after a brew cycle has been completed.
7.The display should now read X.X HRS UNTIL NEXT CLEAN, and then advance to the next programming function, ENABLE ENERGYSAVR.
8.Once the set time has expired, the display will read PLEASE SANITIZE, and then PRESS LARGE FOR 3 SEC TO CANCEL.
9.Clean and sanitize the machine.
10.When finished, press and hold the LARGE batch button to reset the Sanitation timer. The display should now read SANITATION COMPLETE and then will return to the MAIN SCREEN.
ENABL CLEAN ?
NO DONE YES
WITH NO FLASHING | WITH YES FLASHING |
PRESS DONE | PRESS DONE |
Enabl Energy Savr | X.X HRS |
NO DONE YES |
X.X HRS UNTIL
NEXT CLEAN
WHEN TIME HAS
EXPIRED, THE
DISPLAY Will READ:
PLEASE SANITIZE
PRESS LARGE FOR 3 SEC TO CANCEL
CLEAN AND SANITIZE
MACHINE, WHEN FINISHED
PRESS LARGE
SANITATION
COMPLETE
Page 35 | 40119 071107 |
|
