Cabletron Systems EMM-E6 Ethernet manual Standard Local Download, Standard Download Procedure

STANDARD LOCAL DOWNLOAD

15.3STANDARD LOCAL DOWNLOAD

Table 15-1 provides a step by step procedure for downloading the firmware image file. This section provides specific MIB OIDs, their names, and the required setting for proper image file download. Refer to your specific MIB walking tool documentation for instructions on how to set MIB OID strings.

The Download OIDs for Cabletron products reside in Cabletron enterprise MIBs (group 52). The specific OIDs necessary to perform an image file download reside in the common download group under ctDL (Cabletron Download). The full OID string to reach this group is:

1.3.6.1.4.1.52.4.1.5.8.1

When performing the steps in Table 15-1, keep the following in mind:

•You must follow the steps in order.

•Enter the IP address of the tftp server in standard dotted decimal notation (e.g., 132.177.118.24).

•Enter the FULL path to the image file in the ctDLTFTPRequest OID, including the name of the image file (e.g., c:\tftpboot\EMME6.hex).

Table 15-1. Standard Download Procedure

Step	OID Name	OID Number	Data	SNMP
			Type	OID Data
(1).	ctDLForceOnBoot	1.3.6.1.4.1.52.4.1.5.8.1.1.0	integer	1
(2).	ctDLCommitRAMToFlash	1.3.6.1.4.1.52.4.1.5.8.1.2.0	integer	1
(3).	ctDLTFTPRequestHost	1.3.6.1.4.1.52.4.1.5.8.1.4.0	IP	Enter the IP
			address	address of
				the tftp
				server.
(4).	ctDLTFTPRequest	1.3.6.1.4.1.52.4.1.5.8.1.5.0	string	Enter the
			(ASCII)	path to the
				image file.
(5).	ctDLInitiateColdBoot	1.3.6.1.4.1.52.4.1.5.8.1.3.0	integer	1

EMM-E6 User's Guide 15-7