Cabletron Systems EMM-E6 Ethernet manual MIB Navigator Command SET Overview

MIB NAVIGATOR COMMAND SET OVERVIEW

13.3MIB NAVIGATOR COMMAND SET OVERVIEW

There are three categories of commands in the command set.

•Navigation Commands - Allows the user to access and manage the MIB for the device running the MIB Navigator. Some of commands also provide user community-string information. The commands are as follows:

-	branch	-	cd	-	ctron	-	dir
-	get	-	ls	-	mib2	-	next
-	pwd	-	set	-	show	-	su
-	tree	-	whoami

•Built-In Commands - Allows the user to access and manage network devices connected to the device running the MIB Navigator. The commands are as follows:

-	arp	-	defroute	-	netstat	-	ping
-	snmpbranch	-	snmpget	-	snmpset	-	snmptree

-traceroute

•Special Commands - Allows the user to exit from the MIB Navigator. The commands are as follows:

- done - quit - exit

13.3.1Conventions For MIB Navigator Commands

The following conventions are used for denoting commands:

•Information keyed by the user is shown in this helvetica font.

•Command arguments are indicated by two types of brackets:

-required arguments are enclosed by [].

-optional arguments are enclosed by <>.

MIB Navigator command conventions are as follows:

EMM-E6 User’s Guide 13-3