APPENDIX B
EMM-E6 OIDs
This Appendix contains a selected number of OID strings that are among the most frequently needed. The OIDs are implemented by using either the SNMP Tools procedures detailed in Chapter 9 or the MIB Navigator procedures located in Chapter 13. Note that the OIDs can be accessed using LANVIEW, SPECTRUM, SPMA, or the SNMP element management packages of other vendors.
B.1 SPANNING TREE PROTOCOL
The following OID is used to select the desired Spanning Tree Protocol.
ctBridgeStpProtocolSpecification
Description: This object allows the network manager to select which Spanning Tree Protocol will be operational on the bridge. The value ‘decLb100’ (2) indicates the DEC LANBridge 100 Spanning Tree Protocol. The value ‘ieee8021d’ (3) indicates the IEEE 802.1d Spanning Tree Protocol. The value ‘none’ (1) indicates no Spanning Tree Protocol is operational.
Object Identifier: | 1.3.6.1.4.1.52.4.1.2.3.2.1 | |
Data Type: | Integer |
|
Values: | 1 | None |
| 2 | decLb100 |
| 3 | ieee8021 |
Access Policy: |
| |
