Cabletron Systems EMM-E6 Ethernet manual Enabling & Disabling Snmp Traps, RptrHwTrapsSetLink

APPENDIX B: COMMONLY-USED OIDs

B.4 ENABLING & DISABLING SNMP TRAPS

The EMM-E6 supports the collection and reporting of SNMP Traps of several types and at several levels. SNMP Trap sending may be enabled or disabled for the following trap types: segmentation, link, and source addressing. The traps may be enabled on the network level, module level, or port level.

B.4.1 Enabling Network Level SNMP Traps

The next three OIDs control traps enable and disable at the network level or channel level.

rptrHwTrapsSetLink

Description: Enables and disables link traps for this network (i.e., Channel A, B, or C).

Object Identifier:	1.3.6.1.4.1.52.4.1.1.1.4.1.6.1.1
Data Type:	Integer
Values:	1	disable
	2	enable
Access Policy:	read-write

rptrHwTrapsSetSeg

Description: Enables and disables segmentation traps for this network (i.e., Channel A, B, or C).

Object Identifier:	1.3.6.1.4.1.52.4.1.1.1.4.1.6.1.2
Data Type:	Integer
Values:	1	disable
	2	enable
Access Policy:	read-write

B-6 EMM-E6 User's Guide