Cabletron Systems EMM-E6 Ethernet manual Parameter Typical Minimum

APPENDIX A: EMM-E6 SPECIFICATIONS

	Table A-2. EPIM-F3 Statistics
Parameter	Typical	Minimum	Maximum
Transmitter Peak	1300 nm	1270 nm	1330 nm
Wave Length:
Spectral Width:	60 nm	—	100 nm
Rise Time:	3.0 ns	2.7 ns	5.0 ns
Fall Time:	2.5 ns	2.2 ns	5.0 ns
Duty Cycle:	50.1%	49.6%	50.7%
TX Power:	-15.1 dBm
TX Budget:	14.4 dBm
RX Sensitivity:	-29.5 dBm
MAX Receive	-6.99 dBm
Power:
Bit Error Rate:	Better than 10-10

NOTE

The above transmitter power levels and receive sensitivity levels represent Peak Power Levels after optical overshoot. You must use a Peak Power Meter to correctly compare the above values to those you measure on any particular port. If you measure Power Levels with an Average Power Meter, you must subtract 3 dBm from the measurement to correctly compare those measured values to the values listed above (e.g., -29.5 dBm peak = -32.5 dBm average).

A-8 EMM-E6 User’s Guide