Cabletron Systems EMM-E6 Ethernet manual Using the Reset Switch

USING THE RESET SWITCH

14.3USING THE RESET SWITCH

The EMM-E6 incorporates a recessed reset switch, located above the LEDs (see Figure 14-1). This reset switch initializes the EMM-E6 processor. This switch does NOT initialize Non-Volatile Random Access Memory (NVRAM), the non-volatile random access memory where the EMM-E6 stores network management parameters.

To use the reset switch, use a pen or pencil to press the switch in. When this is done, the EMM-E6 initializes itself.

EMM-E6 User’s Guide 14-7