Bunn TITAN DUAL PROGRAMMING THE BREWER cont PROGRAMMING FUNCTIONS - LEVEL 2 cont, Set Language

PROGRAMMING THE BREWER (cont.)

PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)

The functions in the second level of programming allow the operator to adjust brew settings and other feature options.

To access the level 2 function screens press and hold the right hidden button for approximately 5 seconds. Release when the display reads:

SET LANGUAGE

This function allows the operator to select the language used for the display.

Procedure for setting Language:

1.Press and hold the right hidden button until the display reads SET LANGUAGE? and release.

2.Press YES to proceed. The display should now read ENGLISH. Using (-)and (+), scroll through the available languages until the desired language is shown on the display.

3.When finished, press SELECT. If the language selected is different from the current settings,the display will read CHANGE LANGUAGE? ARE YOU SURE? and then will change to CHANGE LANGUAGE? To convert the display to the new language, press YES. To retain the current language, press NO.

4.The display should now read UNITS. To exit programming and return to the MAIN SCREEN, press and release either ON/OFF button.

SET LANGUAGE?

NO YES

ENGLISH

(-) SELECT (+)

UNITS

METRIC DONE ENG

ESPANOL

(-) SELECCIONE (+)

Scrolls through all available languages in memory

Page 16 3811240119. 071421075