PROGRAMMING THE BREWER (cont.)
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
SERVICE NUMBER
This function allows the operator to enter in the tele- phone number to call if service is needed. The service number will be displayed anytime there is a fault mes- sage displayed (see Troubleshooting on page 46).
Procedure to enter the service number:
1.Press and hold the right hidden button until the display reads SET LANGUAGE. Press the right hidden button until the display reads:
ENTER SERVICE #?
2.Press and release YES. The display will now read SCROL THRU #'S NEXT
3.Press the SCROL button to scroll through the num- bers. When the desired number is shown, press and release NEXT to move to the next digit in the phone number.
4.Repeat Step 3 until the entire number is entered.
5.Press and release DONE. The display will now read
SERVICE TOOLS?
ENTER SERVICE #?
NO YES
SCROL THRU #'S
SCROL DONE NEXT
SERVICE TOOLS?
NO YES
Page 39 | 40119 071107 |
|