Bunn TITAN DUAL Brew Settings, Procedure to set or modify brew volumes. Range 10 to 500 oz, Next

PROGRAMMING THE BREWER (cont.)

PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)

BREW SETTINGS

This function allows the operator to modify the BREW VOLUMES, BYPASS PERCENTAGES and BREW METER for each batch size of both brew stations.

Procedure to set or modify brew volumes. Range: 10 to 500 oz.

1.Press and hold the right hidden button until display reads SET LANGUAGE. Press the right hidden but- ton until display reads BREW SETTINGS ?.

2.Press YES to proceed. The display should now read LEFT SIDE, along with MODIFY, SHOW and

NEXT.

3.Press and release MODIFY. The display should read L BREW OZ XXX.X: and a batch light will be

blinking.

4. Using (-)and (+), set the amount of brew water, in ounces, to be dispensed over the grounds for that particular batch size.

5.When finished, press the other batch size and repeat step 4.

6.When finished setting both batch sizes, press DONE. The display should read 2 BATCH SIZES DONE?

7.If both batch sizes are not correct, press NO to return to the L BREW OZ setup screen and repeat steps 4, 5 and 6.

8.If both batch sizes are correct, press YES. This will advance to the % BYPASS function. Another alternative is to press and release either ON/OFF button to exit the BREW OZ setup and return to the

MAIN SCREEN.

BREW SETTINGS ?

NO YES

PRESSING NO WILL	LEFT SIDE
ADVANCE TO NEXT
FUNCTION SCREEN	MODIFY SHOW NEXT

SET BOTH	L BREW OZ XXX.X
	(-) DONE (+)
BATCH SIZES

2 BATCHES DONE ?

NO YES

% BYPASS XXX.X (-) DONE (+)

Page 20 40119 071107